Wi-Fi installation service & dead-zone fixes in Orlando & Central Florida
Fast internet means little if the signal can’t reach the rooms you use. We measure signal strength room by room, then set up the router, mesh system or access points that fit your layout, with sensible channels, a separate guest network and your devices tested before we leave.
5.0 on Google · 33 reviews
On-site or in our shop, by appointment.
What’s included
- Switch, Router & Modem Setup
- Wireless Signal Strength Testing
- Mesh Wi-Fi & Wi-Fi 6/6E
- Access Points & Hotspots
- Where
- Your home, office or our shop
- Booking
- By appointment
- Hours
- Mon–Sat, 9 AM–9 PM
- Covers
- 31 Central Florida communities
Sound familiar?
Tick what matches. It goes straight into your request, so you don’t type it twice.
How we handle it
The same four steps every time, so you always know what’s next.
- 1
Survey the signal
We walk the home or office with a Wi-Fi analyzer and measure signal strength, noise and neighboring networks in each room, starting with the rooms you use most.
- 2
Plan placement and backhaul
Routers and mesh nodes go high, central and clear of metal, mirrors and aquariums. Wherever Ethernet can reach a node or access point, we use it for the backhaul.
- 3
Tune the settings
We pick channels and widths around your neighbors, update firmware and turn on WPA3 where your devices support it. If the provider’s modem and your router are both routing (double NAT), we fix that too.
- 4
Test and hand over
We re-measure each room, run speed tests near and far from the router, and leave the network names and passwords written down for you.
Mesh, access points or a better-placed router?
One router in the corner of a Florida home rarely covers every room. Concrete block, stucco over metal lath and low-E window coatings all weaken the signal, which is why the lanai and the far bedrooms often get nothing. Mesh systems add nodes, but how those nodes connect matters. With wired backhaul, each node reaches the router over Ethernet and keeps its full speed. With wireless backhaul, every hop costs speed, and a node placed inside the dead zone has nothing good to pass along.
In offices and larger homes, ceiling-mounted access points powered over their Ethernet cable (PoE) give the steadiest coverage. Sometimes the fix is simpler: move the router out of the TV cabinet.
Bands, channels and the 6 GHz catch
Wi-Fi uses three bands. 2.4 GHz reaches farthest but is slow and crowded, with only three channels that don’t overlap (1, 6 and 11), and it’s where most smart plugs, cameras and doorbells live. 5 GHz is the everyday workhorse. 6 GHz, added with Wi-Fi 6E, is fast and uncrowded but has the shortest range, so it shines in the same room as the router and fades a wall or two away.
We keep 2.4 GHz at 20 MHz wide, pick 5 GHz channels and widths around your neighbors, and check which of your devices can use 6 GHz at all. Only Wi-Fi 6E and newer phones and laptops can, so 6 GHz does nothing for an older laptop.
Guest networks, rentals and smart homes
A guest network keeps visitors away from the computers and files on your main network. That matters in the vacation-rental homes around Davenport, ChampionsGate and Four Corners, where guests change every few days. We turn on client isolation so guests can’t see each other’s devices, and set a password you can change between stays. Restaurants and offices get the same setup as a customer hotspot, kept apart from the registers and office PCs.
Smart-home gear gets its own network too, so a cheap camera or plug can’t become a way into your laptop. And a faster internet plan won’t fix a bad layout. If the signal can’t reach a room, extra speed at the modem never gets there either.
Questions about Wi-Fi & internet setup
Still unsure? Call or text (407) 773-0904 and describe what’s happening.
Why is my Wi-Fi slow when my internet plan is fast?
Usually it’s the signal, not the plan. Distance, walls and crowded channels cut Wi-Fi speed long before your connection runs out, so we fix placement and settings before anyone suggests paying for more.
Is mesh Wi-Fi worth it?
In larger homes, two-story homes and block construction, usually yes, especially with the nodes wired back to the router. In a compact condo, one well-placed router often does the job, and we’ll tell you so.
Do I need a Wi-Fi 6E router?
Only if your phones and laptops support 6E and you use them near the router or an access point. For most homes, a well-placed Wi-Fi 6 system on 5 GHz covers everyday needs.
Can you set up guest Wi-Fi for my vacation rental?
Yes. We set up a guest network with client isolation and an easy-to-change password, and keep your own gear, like smart locks and cameras, on a network guests can’t reach.
On-site across Central Florida
We handle Wi-Fi & internet setup at homes and offices in 31 communities, by appointment.
Request this service
Two short steps. We’ll call or text you during business hours to set a time.
- We read it. Your request goes straight to our inbox.
- We reach out. By call, text or email, Mon–Sat 9 AM–9 PM.
- We fix it. At your home or office, or in our shop for bigger jobs.