Laptop fan cleaning & thermal paste replacement in Orlando & Central Florida
Laptop fan cleaning clears the dust and pet hair that choke airflow, and fresh thermal paste restores the heat path between the processor and its heatsink. Together they bring temperatures down, quiet the fan and end slowdowns caused by heat. We measure before and after, so you can see the difference.
5.0 on Google · 33 reviews
On-site or in our shop, by appointment.
What’s included
- Laptop Fan Cleaning
- Thermal Paste Replacement
- Where
- Your home, office or our shop
- Booking
- By appointment
- Hours
- Mon–Sat, 9 AM–9 PM
- Covers
- 31 Central Florida communities
Sound familiar?
Tick what matches. It goes straight into your request, so you don’t type it twice.
How we handle it
The same four steps every time, so you always know what’s next.
- 1
Measure it hot
We run a stress test and log processor temperatures, clock speeds and fan speeds. That gives you a real before-and-after, not a guess.
- 2
Clear the airflow
We open the case, hold the fan still while cleaning it, and lift out the dust mat packed against the heatsink fins, where canned air through the vents can’t reach.
- 3
Refresh paste and pads
We clean the old paste off the processor and any separate graphics chip and apply fresh paste. Thermal pads are renewed at the correct thickness, so the heatsink seats flat.
- 4
Retest under load
We rerun the same test and compare temperatures and clock speeds. We also listen for bearing noise that means a fan needs replacing.
Why a hot laptop gets slow
Laptop processors protect themselves. When one reaches its limit, around 95 to 100 °C on most chips, it cuts its own speed. That is thermal throttling, and it feels like the computer is failing when it is really just too hot.
Two things usually cause it. Dust and pet hair build a felt-like mat on the inside face of the heatsink fins, right where the fan pushes air through, so the fan spins harder and moves less heat. And thermal paste, the layer that carries heat from the chip to the heatsink, dries out after years of heating and cooling. One honest caveat: if your laptop is slow but runs cool, heat isn’t the problem, and a tune-up or an SSD will do more.
Paste, pads and the details that matter
Paste goes on the processor and, on laptops with separate graphics, on the graphics chip too. Thermal pads cool the memory and power components nearby, and they come in set thicknesses, commonly 0.5 to 2 mm. The wrong thickness can hold the heatsink off the processor and make temperatures worse, so we match what the factory used.
Some gaming laptops use liquid metal instead of paste. It doesn’t dry out the way paste does, so if it is still doing its job, we leave it alone. It also conducts electricity, so when it does need redoing, the parts around the chip are insulated first. On some models the heatsink only comes out after the motherboard does, which makes it a bigger job, and we’ll tell you up front if yours is one of them.
Noisy fans and fan replacement
A fan that ticks usually has debris touching a blade, and cleaning fixes it. A fan that grinds, rattles or whines and stays loud after cleaning has worn bearings. Oiling a sealed bearing quiets it for a while, but the lasting fix is laptop fan replacement with a fan that matches your model’s mount and connector. We confirm the exact part your model needs.
A fan warning at startup, like the “System Fan (90B)” message on HP laptops, usually means the fan has stopped or is spinning too slowly. Don’t keep working through it. Without a working fan, the laptop will throttle hard or shut down to protect itself, and every overheat is hard on the parts inside.
Questions about fan cleaning & thermal paste
Still unsure? Call or text (407) 773-0904 and describe what’s happening.
How often should a laptop be cleaned inside?
Every year or two for most laptops. With pets, or if it lives on a bed or couch where fabric blocks the vents, more often.
Can I just use canned air on the vents?
It helps a little, but the dust mat sits on the inside face of the heatsink, where air blown in from outside often just packs it tighter. Blowing into a fan that isn’t held still can also overspin it and wear the bearing.
How do I know if my laptop needs new thermal paste?
High temperatures under light work, a fan that ramps up constantly and slowdowns that ease once it cools are the usual signs, especially on a laptop three or more years old. We confirm it with a temperature test before opening anything.
Will cleaning make my laptop faster?
If heat has been throttling it, yes, and you’ll notice under load. If it runs cool and is still slow, the cause is elsewhere, and we’ll point you to the right fix.
On-site across Central Florida
We handle fan cleaning & thermal paste at homes and offices in 31 communities, by appointment.
Request this service
Two short steps. We’ll call or text you during business hours to set a time.
- We read it. Your request goes straight to our inbox.
- We reach out. By call, text or email, Mon–Sat 9 AM–9 PM.
- We fix it. At your home or office, or in our shop for bigger jobs.